.svg?sv=2022-11-02&spr=https&st=2024-12-22T18%3A45%3A54Z&se=2024-12-22T18%3A55%3A54Z&sr=c&sp=r&sig=JowbjL0VCJiQKpu8vCQw5B1mNMqSe%2B%2FMbmd3WJjGn3g%3D){kind=logo}
TWAMP Control Compatibility Matrix
- 24 Jul 2024
- 1 Minute to read
- Contributors
- Print
- PDF
TWAMP Control Compatibility Matrix
- Updated on 24 Jul 2024
- 1 Minute to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Note: The commands may have changed and need to be validated with the 3rd party.
Depending on vendor of the TWAMP-Control server (reflector) the Provider Connectivity Assurance solution TWAMP solution has implemented operation in two distinct modes .
The parameter, called “Legacy Mode”, to configure this can be found in the Analyzer Client under “TWAMP Control” Configuration for each external reflector making use of the control protocol. For more information see, "Managing Reflectors"
To ensure compatibility of the control protocol between the Provider Connectivity Assurance system and the 3rd party device use the guidelines seen in the table below.
| Vendor | Legacy Mode Setting |
|---|---|
| Huawei | Enabled |
| Samsung | Disabled |
| Juniper | Disabled |
| Nokia (ALU 77 xx) | Disabled |
| Cisco | Disabled |
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?