Module Dock System Interface
  • 25 Sep 2024
  • 1 Minute to read
  • Contributors
  • PDF

Module Dock System Interface

  • PDF

Article summary

Use the System Interface page to customize certain Module Dock features.


Note: The Module Dock's IP network mask has been set to 255.255.255.0 and cannot be changed.

To manage the Module Dock's system configuration

  1. Access the page AMD System ▶ Interface.

  2. Complete the required fields, then click Apply.

For more information on specific parameters, refer to the following table.

Module Dock Configuration (AMD System ▶ Interface)

ParameterDescription
AMD IP AddressEnter the new IP address to assign to the Module Dock here.

If you change the Module Dock's IP address, the shortcut provided in the link stored on the system's mass storage (URL.txt) is no longer valid.

Note: It is only recommended to change the IP address assigned to the Module Dock if required due to addressing conflicts.

AMD IP Network MaskThe exact value of the Module Dock's assigned IP network mask (255.255.255.0 or /24, class C network) is provided here for your convenience.

You cannot modify this value.

© 2024 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.