.svg?sv=2022-11-02&spr=https&st=2024-12-22T22%3A57%3A19Z&se=2024-12-22T23%3A07%3A19Z&sr=c&sp=r&sig=HAOOlEDqf0CyfG9D2iby1CHDl7MxBUm86Nl%2FxoOOR98%3D){kind=logo}
Setting Up SAT Reporting
- 09 Aug 2024
- 1 Minute to read
- Contributors
- Print
- PDF
Setting Up SAT Reporting
- Updated on 09 Aug 2024
- 1 Minute to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
You can set up the unit to enable the transfer of SAT test reports to a server. Once enabled, test reports are automatically transferred to the server each time a test is completed.
Test reports are available for Y.1564. All reports are available in text or XML format.
To set up SAT reporting
Access the page SAT ▶ Reporting.
Complete the required fields, then click Apply.
For more information on specific parameters, refer to the following table.
SAT Reporting (SAT ▶ Reporting)
RFC-2544 Settings
| Parameter | Description |
|---|---|
| Enable Reporting | Check box to enable or disable the transfer of RFC-2544 reports to the specified server. |
| Enable TXT File Transfer | Check box to enable or disable the transfer of RFC-2544 reports in text format to the specified server. |
| Enable XML File Transfer | Check box to enable or disable the transfer of RFC-2544 reports in XML format to the specified server. |
Y.1564 Settings
| Parameter | Description |
|---|---|
| Enable Reporting | Check box to enable or disable the transfer of Y.1564 reports to the specified server. |
| Enable TXT File Transfer | Check box to enable or disable the transfer of Y.1564 reports in text format to the specified server. |
| Enable XML File Transfer | Check box to enable or disable the transfer of Y.1564 reports in XML format to the specified server. |
File Server Configuration
| Parameter | Description |
|---|---|
| Server URL | The full URL of the server to which to send test reports. Examples: ftp://username:password@example.com ftps://username:password@example.com sftp://username@192.0.2.0/24 tftp://192.0.2.0/24 scp://username@192.0.2.0/24:/target_directory scp://username@[2001:DB8::/32]:/target_directory |
| SCP Password | Enter the password required for SCP and SFTP transfers. |
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?