Managing the NETCONF Agent
- 24 Jan 2024
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Managing the NETCONF Agent
- Updated on 24 Jan 2024
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
You can configure a NETCONF agent so users with a NETCONF client can get or edit configuration and get notifications from the unit via the NETCONF protocol.
Note: Only NETCONF or SNMP (not both) can be enabled at the same time.
To enable the NETCONF agent
Access the page System ▶Agent ▶NETCONF.
Complete the required fields, then click Apply.
For more information on specific parameters, refer to the following table.
NETCONF Agent (System ▶Agent ▶NETCONF)
| Parameter | Description |
|---|---|
| Enable Agent | Check box to enable the unit's NETCONF agent. |
© 2024 Accedian Networks Inc. All rights reserved. Accedian®, Accedian Networks®, the Accedian logo™, Skylight™, Skylight Interceptor™ and per-packet intel™, are trademarks or registered trademarks of Accedian Networks Inc. To view a list of Accedian trademarks visit: http://accedian.com/legal/trademarks/.
Was this article helpful?
