- Print
- PDF
Overview
The following procedure is recommended to upgrade a Skylight Flex unit using the AFL file and Skylight Flex CLI. The Skylight Flex platform has enough space on the storage to save two copies of the entire software.
Product Name | Software Version | Build Number | Software Files |
---|---|---|---|
Skylight Flex 100 | 23.09.1 GA | 2393 | AMO-100G-NG_23.09.1_2393.afl.startup AMO-100G-NG_23.09.1_2393.afl Accedian_MIB_2393 Accedian_YANG_2393 |
Skylight Flex 25 | 23.09.1 GA | 2393 | AMO-25G-NG_23.09.1_2393.afl.startup AMO-25G-NG_23.09.1_2393.afl Accedian_MIB_2393 Accedian_YANG_2393 |
Note: Skylight Flex 100 software file is used in the following example.
Using AFL File for Client
Downloading Accedian AFL Firmware
To download Accedian firmware using TFTP
- From the file server accessible to clients, download the file:
AMO-100G-NG_23.09.1_2393.afl
- Copy the file to the TFTP server; example: 10.247.0.70
scp AMO-100G-NG_23.09.1_2393.afl <user>@10.247.0.70:/home/<user>/TFTP_File_Server/tftpboot
OR
To download Accedian firmware using SFTP
- From the file server accessible to clients, download the file:
AMO-100G-NG_23.09.1_2393.afl
- Copy the file to the SFTP server, example: 192.168.1.109
scp AMO-100G-NG_23.09.1_2393.afl <user>:<Pass>@192.168.1.109:/home/<user>/SFTP_File_Server/sftpboot
Installing Accedian AFL Firmware on Skylight Flex
This install procedure requires a 2-step process, retrieving the file (a), followed by activation (b). These steps can be accomplished independently.
Note: Although optional, saving the running-config to the startup-config is required if intending to bring back the running-config after activating the new firmware.
To install firmware version 2393 using TFTP
- Do the following from the Skylight Flex unit:
a) Retrieve the official AMO-100G-NG_23.09.1_2393.afl file from the TFTP server by typing following commands in the CLI:
ssh root@x.x.x.x <--- IP address of your Skylight Flex unit.
archive download-sw /overwrite tftp://10.247.0.4/AMO-100G-NG_23.09.1_2393.afl
b) Activate the firmware:
configure terminal
firmware activate; exit; exit
- Wait approximately two minutes as the unit will reboot.
OR
To install firmware version 2393 using SFTP
- Do the following from the Skylight Flex unit:
a) Retrieve the official AMO-100G-NG_23.09.1_2393.afl file from the SFTP server by typing following commands in the CLI:
ssh root@x.x.x.x <--- IP address of your Skylight Flex unit.
archive download-sw /overwrite sftp://sftp_user:sftp_user@192.168.1.109/AMO-100G-NG_23.09.1_2393.afl
b) Activate the firmware:
configure terminal
firmware activate; exit; exit
- Wait approximately two minutes as the unit will reboot.
Verifying the Active Firmware Version
Validate the active firmware version after the Skylight Flex device is rebooted.
To verify the active firmware version
- Type the following in the Skylight Flex CLI:
Your Product# show system information
The following information will appear:
Hardware Version : 500-173-01
Software Version : 10.04.006.00.02
Firmware Version : AMO-100G-NG_23.09.1_2393
Hardware Serial Number : C414-0305
Software Serial Number : 1-0-0
Switch Name : C414-0305
System Contact : Accedian, Canada
System Name : C414-0305
System Location : Accedian, Canada
Logging Option : Console Logging
Device Uptime : 0 Days, 0 Hrs, 0 Mins, 54 Secs
Login Authentication Mode : Local
Config Save Status : Not Initiated
Remote Save Status : Not Initiated
Config Restore Status : Not Initiated
Traffic Separation Control : none
The Skylight Flex device upgrade to AMO-100G-NG_23.09.1_2393 is complete.
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks