Shutdown Interface

This article describes the configuration of interface P2 to raise a defect/fault in sample topology.

CLI Configurations

At Switch5

• Make interface P2 as down.

your product(config)# interface gigabitethernet 0/2
your product(config-if)# shutdown

• Wait for 15 seconds to check for any link failure (error/fault/defect).

SNMP Configurations

At Switch5

• Make interface P2 as down. [Index: Interface Number = 2]

% snmp0 set {{ifMainAdminStatus.2 down}}

• Wait for 15 seconds to check for any link failure (error/fault/defect).