SFTP Commands
- 06 Jul 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
SFTP Commands
- Updated on 06 Jul 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
SFTP (Secure File Transfer Protocol) CLI commands are categorized as follows:
Configuration Commands
This section includes the SFTP configuration command.
sftp port
Command Objective:
This command configures the default SFTP port number. An administrator can give numerical values from 1025 to 65535.
The no form of the command resets the SFTP port number to the default or standard SSH port number 22.
Syntax:
sftp port <port-number (1025-65535)>
no sftp port
Mode:
Global Configuration Mode
Example:
Your Product (config)# sftp port 2000
Display Commands
This section includes the SFTP display command.
show sftp port
Command Objective:
This command displays the default SFTP port number.
Syntax:
show sftp port
Mode:
Privileged EXEC Mode
Example:
Your Product (config)# show sftp port
SFTP destination port number: 2000
© 2024 Accedian Networks Inc. All rights reserved. Accedian®, Accedian Networks®, the Accedian logo™, Skylight™, Skylight Interceptor™ and per-packet intel™, are trademarks or registered trademarks of Accedian Networks Inc. To view a list of Accedian trademarks visit: http://accedian.com/legal/trademarks/.
Was this article helpful?
