QoS Overview
- 19 Jan 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
QoS Overview
- Updated on 19 Jan 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
QoS Product is an implementation of the 802.1p which are basic models for delivering IP Quality of Service, as defined in the IETF Qos Framework.
QoS is an IP Traffic Engineering module which is designed to combine QoS models, such as statically configured Per-Hop classification methods, Relative Priority Marking and Service Marking besides shaping and scheduling for traffic flows.
These articles describe the basic and advanced configuration tasks of QoS. The CLI (Command Line Interface) commands are used for the configuration of the switch. These articles are indented for use by administrators of the Skylight Flex 100 switching solution and describe the step by step configuration of specific features, using sample values. They do not cover the explanation for the configuration parameters and the related values, if any.
General Configurations
Basic CLI Configurations
The following table provides the access and exit methods to various general configuration modes.
| Command Mode | Access Method | Prompt | Exit Method |
|---|---|---|---|
| User EXEC | This is the initial mode to start a session. | your product> | The logout method is used. |
| Privileged EXEC | The User EXEC mode command enable, is used to enter the Privileged EXEC mode. | your product # | To return from the Privileged EXEC mode to User EXEC mode the disable command is used. |
| Global Configuration | The Privileged EXEC mode command configure terminal, is used to enter the Global Configuration mode. | your product (config)# | To exit to the Global Configuration mode the exit command is used and to exit to the Privileged EXEC mode the end command is used. |
| Interface Configuration | The Global Configuration mode command interface < interface-type >< interface-id > is used to enter the Interface configuration mode. | your product (config-if)# | To exit to the Global Configuration mode the exit command is used and to exit to the Privileged EXEC mode the end command is used. |
© 2024 Accedian Networks Inc. All rights reserved. Accedian®, Accedian Networks®, the Accedian logo™, Skylight™, Skylight Interceptor™ and per-packet intel™, are trademarks or registered trademarks of Accedian Networks Inc. To view a list of Accedian trademarks visit: http://accedian.com/legal/trademarks/.
Was this article helpful?
