Initializing ECFM

This article describes the enabling of ECFM, MIP CCM database, and traceroute caching.

CLI Configurations

At Switch1, Switch2, Switch3, Switch4, Switch5, Switch6, Switch7, Switch8

• Enable ECFM.
  your product(config) # ethernet cfm enable

• Enable MIP CCM database.
  your product(config) # ethernet cfm mip ccm-database

• Enable Traceroute caching.
  your product(config) # ethernet cfm traceroute cache

SNMP Configurations

At Switch1, Switch2, Switch3, Switch4, Switch5, Switch6, Switch7, Switch8

• Enable ECFM. [Index: ContextID = 0]
  % snmp0 set {{fsMIEcfmSystemControl.0 start }}
  % snmp0 set {{fsMIEcfmModuleStatus.0 enabled }}

• Enable MIP CCM database. [Index: ContextID = 0]
  % snmp0 set {{fsMIEcfmMipCcmDbStatus.0 enabled }}

• Enable traceroute caching. [Index: ContextID = 0]
  % snmp0 set {{fsMIEcfmLtrCacheStatus.0 enabled }}