Enabling Y.1731
- 27 Jun 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Enabling Y.1731
- Updated on 27 Jun 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
This article describes how to enable Y.1731.
CLI Configurations
At CUST1, CUST2, and CUST3
- Enable Y.1731.
your product# configure terminal
your product(config) # ethernet cfm y1731 enable
your product(config) # exit
SNMP Configurations
At CUST1, CUST2, and CUST3
- Enable Y.1731. [Index: ContextID = 0]
% snmp0 set {{fsMIY1731OperStatus.0 enabled *}}
© 2024 Accedian Networks Inc. All rights reserved. Accedian®, Accedian Networks®, the Accedian logo™, Skylight™, Skylight Interceptor™ and per-packet intel™, are trademarks or registered trademarks of Accedian Networks Inc. To view a list of Accedian trademarks visit: http://accedian.com/legal/trademarks/.
Was this article helpful?
