Enabling Telnet
  • 10 Jul 2024
  • 1 Minute to read
  • Contributors
  • PDF

Enabling Telnet

  • PDF

Article summary

This article explains how to enable Telnet on a remote terminal and display the Telnet server status. The Command Line Interface (CLI) can be used to configure the unit from a remote terminal using Telnet.


Note: To log in, enter your username (default is root) and password (default is admin123).

To enable Telnet

  1. Execute the following command in Global Configuration mode:
Your Product# feature telnet
end
  1. View the Telnet service status in Privileged EXEC Mode:
Your Product# show telnet server
telnet service enabled

To disable Telnet

  1. Execute the following command in Global Configuration mode:
Your Product# no feature telnet
end

IMPORTANT: While connected via Telnet, the no feature telnet command is not functional. The command will return:

% Telnet feature cannot be disabled, as telnet session/s are active
% Failed to stop TELNET Service

However, it can be executed when SSH is connected.

  1. View the Telnet service status in Privileged EXEC Mode:
Your Product#  show telnet server
telnet service disabled

About Commands

feature telnet

Command Objective
This command enables the Telnet service in the system.

The no form of this command disables the Telnet service. While connected via Telnet, the no form of this command is not functional.

Syntax

feature telnet
no feature telnet

Mode
Global Configuration mode

Default
Disabled

show telnet server

Command Objective
This command displays the Telnet server status.

Syntax

show telnet server

Mode
Privileged EXEC Mode

© 2024 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.