Configuring VLAN on Switches

This article describes the configuration of VLAN on switches.

CLI Configurations

At Switch1 and Switch5

• Create the VLAN 2.
  your product(config)# vlan 2

• Make interfaces as member ports of this VLAN.
  your product(config-vlan)# ports gigabitethernet 0/2,0/5

• Set the status of VLAN 2 as active.
  your product(config-vlan)# vlan active
  your product(config-vlan)# exit

At Switch3, Switch4, Switch7 and Switch8

• Create the VLAN 4 and make interfaces as member ports of this VLAN.
  your product(config)# vlan 4
  your product(config-vlan)# ports gigabitethernet 0/2,0/3,0/4
  your product(config-vlan)# vlan active
  your product(config-vlan)# exit

SNMP Configurations

At Switch1 and Switch5

• Create the VLAN 2. [Index: ContextID = 0, Vlan-ID = 2]
  % snmp0 set {{fsDot1qVlanStaticRowStatus.0.2 createAndWait }}

• Make interfaces as member ports of this VLAN
  [Index: ContextID = 0, Vlan-ID = 2, Interface Number = 2]
  % snmp0 set {{fsDot1qVlanStaticPort.0.2.2 addTagged }}
  [Index: ContextID = 0, Vlan-ID = 2, Interface Number = 5]
  % snmp0 set {{fsDot1qVlanStaticPort.0.2.5 addTagged }}

• Set the status of VLAN 2 as active. [Index: ContextID = 0, Vlan-ID = 2]
  % snmp0 set {{fsDot1qVlanStaticRowStatus.0.2 active }}

At Switch3, Switch4, Switch7 and Switch8

• Create the VLAN 4 and make interfaces as member ports of this VLAN.
  [Index: ContextID = 0, Vlan-ID = 4]
  % snmp0 set {{fsDot1qVlanStaticRowStatus.0.4 createAndWait }}
  [Index: ContextID = 0, Vlan-ID = 4, Interface Number = 2]
  % snmp0 set {{fsDot1qVlanStaticPort.0.4.2 addTagged }}
  [Index: ContextID = 0, Vlan-ID = 4, Interface Number = 3]
  % snmp0 set {{fsDot1qVlanStaticPort.0.4.3 addTagged }}
  [Index: ContextID = 0, Vlan-ID = 4, Interface Number = 4]
  % snmp0 set {{fsDot1qVlanStaticPort.0.4.4 addTagged }}
  [Index: ContextID = 0, Vlan-ID = 4]
  % snmp0 set {{fsDot1qVlanStaticRowStatus.0.4 active }}