Configuring trTCM Color Aware Mode

Updated on 06 Jul 2023
1 Minute to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

To configure trTCM color aware mode

Follow configurations steps 1 through 8 from the article Configuring trTCM Color Blind Mode.
Configure trTCM metering with color aware mode.

configure terminal
meter 1
meter-type trTCM color-mode aware cir 10000000 cbs 187500000 eir 20000000 ebs 250000000
end

Configure trTCM QOS metering actions.

configure terminal
policy-map 10
set meter 1 exceed-action cos-transmit-set 5 violate-action cos-transmit-set 5
set policy class 10 default-priority-type none
end
configure terminal
set meter-st enable meter-id 1
end

Notes:
Green packet remarking is not supported (the configuration of green remarking priority values is not applicable when metering entry is color aware) and only yellow, red packets remarking are supported.

Red packet remarking should be configured the same as yellow or drop.

© 2024 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks

Was this article helpful?

What's Next

QoS Commands