Configuring the LLDP chassis-ID-subtype

This section explains how to configure the Chassis ID subtype. The Chassis ID subtype can be configured to any of the following values:

• Chassis component
• Interface alias
• Port component
• MAC address
• Network address
• Interface name
• Local
  

  ---

  Note: While configuring the Chassis ID subtype as Chassis component/Port component/Local, an Input string must be given in the command for setting Chassis ID.

  ---

1. Configure LLDP chassis ID subtype by executing the following commands:

• Enter the Global Configuration mode.

your product# configure terminal

• Configure chassis-ID subtype and enable LLDP.

your product(config)# lldp chassis-id-subtype chassis-comp "chassis"
your product(config)# set lldp enable

• Exit from the Global Configuration mode.

your product(config)# end

2. View the local system information of interface 0/1 by executing the following command.

your product# show lldp

LLDP is enabled
Transmit Interval : 30
Holdtime Multiplier : 4
Reinitialization Delay : 2
Tx Delay : 2
Notification Interval : 5
Chassis Id SubType : Chassis Component
Chassis Id : chassis