Configuring MEF 10.2 Decoupled Color Aware

Updated on 10 Jul 2024
1 Minute to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

To configure MEF 10.2 decoupled color aware

Follow configurations steps 1 through 8 from the article Configuring trTCM Color Blind Mode.
Configure MEF decoupled QOS color-aware metering.

configure terminal
meter 1
meter-type mefDeCoupled color-mode aware cir 1048576 cbs 16777216 eir 2097152 ebs 33554432
end

Configure decoupled QOS color-aware metering actions.

configure terminal
policy-map 10
set meter 1 exceed-action cos-transmit-set 5 violate-action cos-transmit-set 5
set policy class 10 default-priority-type none
end
configure terminal
set meter-st enable meter-id 1
end

Notes:
In MEF 10.2 decoupled color aware mode, Green packet remarking is not supported (the configuration of green remarking priority values is not applicable, when metering entry is color-aware) and only yellow, red packets remarking is supported

Red packet remarking should be configured the same as yellow or drop.

© 2024 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks

Was this article helpful?

What's Next

Configuring MEF 10.2 Coupled Color Blind