- 06 Jul 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Configuring MEF 10.2 Decoupled Color Aware
- Updated on 06 Jul 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
To configure MEF 10.2 decoupled color aware
Follow configurations steps 1 through 8 from the article Configuring trTCM Color Blind Mode.
Configure MEF decoupled QOS color-aware metering.
configure terminal
meter 1
meter-type mefDeCoupled color-mode aware cir 1048576 cbs 16777216 eir 2097152 ebs 33554432
end
- Configure decoupled QOS color-aware metering actions.
configure terminal
policy-map 10
set meter 1 exceed-action cos-transmit-set 5 violate-action cos-transmit-set 5
set policy class 10 default-priority-type none
end
configure terminal
set meter-st enable meter-id 1
end
Notes:
In MEF 10.2 decoupled color aware mode, Green packet remarking is not supported (the configuration of green remarking priority values is not applicable, when metering entry is color-aware) and only yellow, red packets remarking is supported
Red packet remarking should be configured the same as yellow or drop.
© 2024 Accedian Networks Inc. All rights reserved. Accedian®, Accedian Networks®, the Accedian logo™, Skylight™, Skylight Interceptor™ and per-packet intel™, are trademarks or registered trademarks of Accedian Networks Inc. To view a list of Accedian trademarks visit: http://accedian.com/legal/trademarks/.