Configuring MEF 10.2 Coupled Color Blind
- 06 Jul 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Configuring MEF 10.2 Coupled Color Blind
- Updated on 06 Jul 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
To configure MEF 10.2 coupled color blind
Follow configurations steps 1 through 7 from the article Configuring trTCM Color Blind Mode.
Configure MEF coupled QOS color-blind metering.
configure terminal
meter 1
meter-type mefCoupled cir 1048576 cbs 16777216 eir 2097152 ebs 33554432
end
- Configure coupled QOS color-blind metering actions.
configure terminal
policy-map 10
set meter 1 conform-action cos-transmit-set 7 exceed-action cos-transmit-set 5 violate-action cos-transmit-set 3
set policy class 10 default-priority-type none
end
configure terminal
set meter-st enable meter-id 1
end
Note: In MEF 10.2 coupled color blind mode, Green packet, Yellow packet, and Red packet remarking are supported.
© 2024 Accedian Networks Inc. All rights reserved. Accedian®, Accedian Networks®, the Accedian logo™, Skylight™, Skylight Interceptor™ and per-packet intel™, are trademarks or registered trademarks of Accedian Networks Inc. To view a list of Accedian trademarks visit: http://accedian.com/legal/trademarks/.
Was this article helpful?
