Configuring Maintenance Domain, Service and MEPs

This article describes the configuration of MD, MA, and MEPs on bridges.

CLI Configurations

At CUST1 and CUST3

• Configure the MD, Service, and MEP list.
  your product(config) # ethernet cfm domain name OP1 level 5
  your product(config-ether-ecfm) # service name maop1 vlan 2
  your product(config-ether-ecfm)# mep crosscheck mpid 10 vlan 2
  your product(config-ether-ecfm)# mep crosscheck mpid 30 vlan 2
  your product(config-ether-ecfm)# end

At CUST1

• Configure the Down MEP.
  your product# configure terminal
  your product(config)# interface gigabitethernet 0/2
  your product(config-if)# ethernet cfm mep level 5 mpid 10 vlan 2 active
  your product(config-ether-mep)# end

At CUST3

• Configure the Down MEP.
  your product# configure terminal
  your product(config)# interface gigabitethernet 0/2
  your product(config-if)# ethernet cfm mep level 5 mpid 30 vlan 2 active
  your product(config-ether-mep)# end

SNMP Configurations

At CUST1 and CUST3

• Create the MD. [Index: ContextID = 0, MD-Index = 1]
  % snmp0 set {{fsMIEcfmMdRowStatus.0.1 createAndWait }}
  % snmp0 set {{fsMIEcfmMdFormat.0.1 charString }}
  % snmp0 set {{fsMIEcfmMdName.0.1 4F:50:31 }}
  % snmp0 set {{fsMIEcfmMdMdLevel.0.1 5 }}
  % snmp0 set {{fsMIEcfmMdRowStatus.0.1 active }}

• Create the MA. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1]
  % snmp0 set {{fsMIEcfmMaRowStatus.0.1.1 createAndWait }}
  % snmp0 set {{fsMIEcfmMaFormat.0.1.1 charString }}
  % snmp0 set {{fsMIEcfmMaName.0.1.1 6D:61:6F:70:31 }}
  % snmp0 set {{fsMIEcfmMaCcmInterval.0.1.1 interval1s }}
  % snmp0 set {{fsMIEcfmMaPrimaryVlanId.0.1.1 2 }}
  % snmp0 set {{fsMIEcfmMaRowStatus.0.1.1 active }}

• Configure the MEP List.
  [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 10]
  % snmp0 set {{fsMIEcfmMaMepListRowStatus.0.1.1.10 createAndGo }}
  % snmp0 set {{fsMIEcfmMaMepListRowStatus.0.1.1.10 active }}
  [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 30]
  % snmp0 set {{fsMIEcfmMaMepListRowStatus.0.1.1.30 createAndGo }}
  % snmp0 set {{fsMIEcfmMaMepListRowStatus.0.1.1.30 active }}

At CUST1

• Configure the Down MEP. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 10]
  % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.10 createAndWait }}
  % snmp0 set {{fsMIEcfmMepPrimaryVid.0.1.1.10 2 }}
  % snmp0 set {{fsMIEcfmMepIfIndex.0.1.1.10 2 }}
  % snmp0 set {{fsMIEcfmMepDirection.0.1.1.10 down }}
  % snmp0 set {{fsMIEcfmMepActive.0.1.1.10 true }}
  % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.10 active }}

At CUST3

• Configure the Down MEP. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 30]
  % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.30 createAndWait }}
  % snmp0 set {{fsMIEcfmMepPrimaryVid.0.1.1.30 2 }}
  % snmp0 set {{fsMIEcfmMepIfIndex.0.1.1.30 2 }}
  % snmp0 set {{fsMIEcfmMepDirection.0.1.1.30 down }}
  % snmp0 set {{fsMIEcfmMepActive.0.1.1.30 true }}
  % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.30 active }}