Configuring Maintenance Association

This article describes the configuration of the CFM MA within a particular MD.

CLI Configurations

To configure MA

1. Execute the steps given in Configuring Maintenance Domain for configuring MD

2. Enter into the ECFM configuration mode and configure service at a specific VLAN
   your product(config-ether-ecfm)# service name CustAssoc1 vlan 101

3. Return to the Global Configuration mode.
   your product(config-ether-ecfm)# exit
   

   ---

   Notes:
   User can configure ICC (ITU Carrier Code) and UMC (Unique MEGID Code) using the service name icc umc command:
   your product(config-ether-ecfm)# service name CustAssoc1 icc icc1 umc umc1 vlan 101
   User can configure MA name type/format using the service format name vlan command:
   your product(config-ether-ecfm)# service format primary-vid vlan 1001
   For the configuration of VLAN-UnAware MA(s), the VLAN keyword must not be provided with the command.

   ---

To delete configured MA

1. Enter into the ECFM configuration mode and delete the service within the MD.
   your product(config-ether-ecfm)# no service name CustAssoc1

SNMP Configurations

To configure MA

1. Execute the steps given in section SNMP Configurations for configuring MD.

2. Configure service at specific VLAN. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1].

3. Configure the row status as createAndWait.
   % snmp0 set {{fsMIEcfmMaRowStatus.0.1.1 createAndWait }}

4. Configure name as CustAssoc1 [Octet value: 43:75:73:74:41:73:73:6f:63:31] and primary VID of the MA as 101.
   % snmp0 set {{fsMIEcfmMaName.0.1.1 43:75:73:74:41:73:73:6f:63:31 }}
   % snmp0 set {{fsMIEcfmMaPrimaryVlanId.0.1.1 101 }}

5. Configure the row status as active.
   % snmp0 set {{fsMIEcfmMaRowStatus.0.1.1 active}}

To delete configured MA

1. Configure the row status as destroy to delete the service within the MD.[Index: ContextID = 0, MD-Index = 1, MA-Index = 1].
   % snmp0 set {{fsMIEcfmMaRowStatus.0.1.1 destroy }}