Associating a Set of VLANs to a Primary VLAN

This article describes the association of the VLANs with a Primary VLAN. The scope of the VLAN association is limited to ECFM entities only.

CLI Configurations

To associate a set of VLANs to a Primary VLAN

1. Enter the global configuration mode.
   your product# configure terminal

2. Associate a list of VLAN IDs to a Primary VLAN.
   your product(config)# ethernet cfm associate vlan-id 1,2,3 primary-vlan-id 7.

To disassociate VLANs from a Primary VLAN

1. Enter into the global configuration mode and delete the mapping of a list of VLAN IDs with a primary VLAN.
   your product(config)# no ethernet cfm associate vlan-id 2,3 primary-vlan-id 7.
   

   ---

   Note: One VLAN cannot be associated with more than one Primary VLAN only.
   VLAN and Primary VLAN cannot be the same.

   ---

SNMP Configurations

1. Associate a set of VLANs 1,2,3 to a Primary VLAN 7

[Index: ContextID = 0, VlanId = 1]
% snmp0 set {{fsMIEcfmVlanRowStatus.0.1 createAndWait }}
% snmp0 set {{fsMIEcfmVlanPrimaryVid.0.1 7 }}
% snmp0 set {{fsMIEcfmVlanRowStatus.0.1 active }}
[Index: ContextID = 0, VlanId = 2]
% snmp0 set {{fsMIEcfmVlanRowStatus.0.2 createAndWait }}
% snmp0 set {{fsMIEcfmVlanPrimaryVid.0.2 7}}
% snmp0 set {{fsMIEcfmVlanRowStatus.0.2 active }}
[Index: ContextID = 0, VlanId = 3]
% snmp0 set {{fsMIEcfmVlanRowStatus.0.3 createAndWait }}
% snmp0 set {{fsMIEcfmVlanPrimaryVid.0.3 7 }}
% snmp0 set {{fsMIEcfmVlanRowStatus.0.3 active }}

2. Disassociate VLANs 2 and 3 from a Primary VLAN 7.

[Index: ContextID = 0, VlanId = 2]
% snmp0 set {{fsMIEcfmVlanRowStatus.0.2 destroy }}
[Index: ContextID = 0, VlanId = 3]
% snmp0 set {{fsMIEcfmVlanRowStatus.0.3 destroy }}