The following procedure explains how to create a network partition configuration in GUI mode.
To create a network partition configuration in GUI mode
-
Access the Network Partitions page.
-
Click the Add partition
button.
The Network partition configuration window is displayed. The Users tab is above.
-
Enter a Partition name.
-
Drag the users that you want to assign to a partition from the left pane to the right pane titled Users to be added.
-
If you do not want to select target devices immediately, click Apply then Close to close the window. The new partition is added to the list.
-
Select the target devices:
Drag the devices from the left pane (Device selection) to the right pane (Target devices). -
Click Apply.
-
Click Close to close the Network Partitions Configuration window.
-
Click the Refresh
button to refresh the user interface.
Network Partition Configuration (Network Partitions â–¶ Add partitions button)
Parameter | Description |
---|---|
Partition name | Name of the partition |
Users tab
Parameter | Description |
---|---|
Name | The list of user name |
Device selection, Elements tab
Parameter | Description |
---|---|
Name | Identifiers for the devices available for selection. Drag devices into the Target devices list. |
Label | User-defined label that will allow users to identify and group modules. |
Serial number | The serial number of the device. |
IP | The IP address of the device. |
MAC address | The MAC address of the device. |
Version | The current firmware version that runs the device. |
Model | The model of the device. |
Target devices | The list of devices selected for one of the user's assigned partitions. |
© 2025 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks