twamp edit
twamp edit - Edit the TWAMP packets reflector instance parameters tied to a remote device.
Description:
twamp edit allows system user to edit TWAMP packets reflector parameters tied to remote devices.
Syntax:
twamp <add | edit> <device-name <name>> {
{state <enable | disable>} |
{udp-port <1-65535>} |
{ip-match <enable | disable>} |
{mode <stateful | hybrid | stateless>} }
<name> = <string>
Parameters:
| Parameter | Description |
|---|---|
| device-name | Remote device's name on which a TWAMP packets reflector instance is edited. |
| state | Enable or disable the TWAMP packets reflector instance on the remote device. |
| udp-port | UDP port on which TWAMP packets are being reflected with a port between 1 and 65535. |
| ip-match | Enable or disable the TWAMP packets reflector for matching device's IP address. The ip-match applies to IPv4 only. ip-match is automatically disabled for IPv6 frames. |
| mode | TWAMP reflection mode. The mode applies to IPv4 only. Reflection automatically in stateless mode for IPv6 frames.
|
twamp show configuration
twamp show configuration - Show the configuration tied to a TWAMP packets reflector instance on a remote device.
Description:
twamp show configuration allows system user to look at the settings and configurable parameters value tied to a TWAMP packets reflector instance on remote devices.
Syntax:
twamp show configuration <device-name <name>>
<name> = <string>
Parameters:
| Parameter | Description |
|---|---|
| device-name | Remote device's name on which the configuration tied to the TWAMP packets reflector instance is shown. |
© 2026 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and trademarks