synce edit
synce edit - Edit SyncE settings.
Description:
Configure the Synchronous Ethernet settings.
Syntax:
synce edit <clock-name> { { state { enable | disable } } |
{ manual-clock <port> } |
{ esmc-ql-mode { enable | disable } }
}
<clock-name> = <string>
Parameters:
| Parameter | Description |
|---|---|
| clock-name | Unique identifier of a clock. |
| State | Enable or disable the SyncE feature. |
| manual-clock | Set the manual clock source selection. |
| esmc-ql-mode | Enable or disable the ESMC QL mode. ESMC QL messages can be sent and received only if this is enabled. If enabled, clock quality information can then be used to automatically select the best clock reference available. |
synce show
synce show - Show the SyncE/ESMC configuration parameters
Description:
This is used to show the current SyncE/ESMC configuration parameters. Use 'help synce edit' for a detailed description of all parameters.
Syntax:
synce show [<clock-name>]
<clock-name> = <string>
Parameters:
| Parameter | Description |
|---|---|
| clock-name | Unique identifier of a clock. |
© 2026 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and trademarks