route add/edit and route ipv6 add/edit
route add - Add a new IPv4 route
route edit - Edit an existing IPv4 route
route ipv6_add - Add a new IPv6 route
route ipv6_edit - Edit an existing IPv6 route
Description:
The route add/edit or ipv6_add/ipv6_edit command lets you add or modify the IPv4 or IPv6 system routing table.
Syntax:
route {add|edit} <route-name> { {type {host | net}} |
{destination <ip-addr>} |
{netmask <ip-addr>} |
{gateway <ip-addr>} |
{interface <interface-name>}
{vce <vce-name>} }+
route {ipv6_add|ipv6_edit} <route-name> {
{destination <ipv6-addr>/<ipv6-prefixLen>} |
{gateway <ipv6-addr>} |
{interface <interface-name>} }+
Parameters:
| Parameter | Description |
|---|---|
| <route-name> | <string> The name of the route. It can be a brief description of the route, e.g., "Default". |
| <interface-name> | <string> The interface with which the route is associated. This is only for specific situations when a target exists on a different network for that interface. In most situations, the interface is determined automatically. To associate the route to a remote device, you must specify a remote interface. |
| type | Route type may either be Network for a range of addresses or Host for a specific IP address. |
| destination | Network or host address of the route. Use 0.0.0.0 (for IPv4) or ::/0 (for IPv6) to denote the default route. |
| netmask | Mask assigned to the route. Only used for network routes. |
| gateway | Gateway address associated with this route or default gateway address. |
| interface | The interface with which the route is associated. This is only for specific situations when a target exists on a different network for that interface. In most situations, the interface is determined automatically. To associate the route to a remote device, you must specify a remote interface. |
| vce | The vce (instead of an interface) with which the route is associated. |
route delete and route ipv6 delete
route delete - Delete an existing IPv4 route
route ipv6_delete - Delete an existing IPv6 route
Description:
The route delete or ipv6_delete commands let you delete configured IPv4 or IPv6 routes in the system.
Syntax:
route {delete|ipv6_delete} <route-name>
Parameters:
| Parameter | Description |
|---|---|
| <route-name> | <string> |
route and route ipv6 show active/configuration
route show configuration - Display statically configured IPv4 routes
route show active - Display active IPv4 routes
route ipv6_show configuration - Display statically configured IPv6 routes
route ipv6_show active - Display active IPv6 routes
Description:
The route show or route ipv6_show commands let you show active and configured IPv4 or IPv6 routes in the system.
Syntax:
route show active [<vce-name>]
route ipv6_show active
route {show|ipv6_show} [configuration [<route-name>]]
Parameters:
| Parameter | Description |
|---|---|
| <vce-name> | <string> |
| <route-name> | <string> |
© 2026 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and trademarks