radius edit
radius edit - Allows you to edit the RADIUS configuration on the Sensor Control
Description:
radius edit allows you to change RADIUS parameters required to authenticate, authorize and possibly perform accounting in the future.
Note: The new parameters are only effective on the next login attempt.
Syntax:
radius edit {
{auth-method {pap | chap | ms-chap | ms-chap2}} |
{auth-server1 {<ip-addr> | <dns-name>}} |
{auth-server1-port <decimal>} |
{auth-server1-secret <string>} |
{auth-server2 {<ip-addr> | <dns-name>}} |
{auth-server2-port <decimal>} |
{auth-server2-secret <string>} |
{radius-timeout <decimal>} |
{radius-retries <decimal>} |
{realm <string>} }+
Parameters:
| Parameter | Description |
|---|---|
| auth-method | Authentication method to use. |
| auth-server1 | RADIUS server to authenticate to. |
| auth-server1-port | RADIUS server UDP port to connect to. |
| auth-server1-secret | Shared secret for server1. |
| auth-server2 | Used only if first server does not respond. |
| auth-server2-port | RADIUS server UDP port to connect to. |
| auth-server2-secret | Shared secret for server2. |
| radius-timeout | Time to wait for the RADIUS server to respond before retrying connection. After the number of retries has been exhausted, a connection to the next configured server will be attempted, in which the same timeout and retry scheme will apply. |
| radius-retries | Number of times to retry the server before trying the next configured server. |
| realm | Append this to user name. Mostly left blank. |
radius show
radius show - Show the RADIUS configuration applied to the Sensor Control
Description:
Show the RADIUS configuration.
Syntax:
radius show
© 2025 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and trademarks