policy

policy add

policy add - Create a policy instance on a port or on a VCA classification

Description:
This command defines the traffic filter and the action associated with an access policy.

Syntax:

  policy add <name> {
        { action [drop | permit]} |
        { filter {l2 | ipv4 | ipv6} <filter-name>} |
        { port <port-name>} |
        { state [enable | disable]} |
        { evc-encapsulation {none | push | pop}}
        { evc-ethertype {c-vlan | s-vlan | t-vlan} |
        { evc-vlan-id <0-4095>} |
        { evc-cfi <0-1>} |
        { evc-pcp <0-7>} |
        { priority <0-255>} |
        { vca <vca-name>} |
        { classification <classification-name>}}+

  <name>                = <string>
  <port-name>           = <string>
  <filter-name>         = <string>
  <vca-name>            = <string>
  <classification-name> = <string>

Parameters:

Parameter	Description
action	Drop or not the traffic based on the filter.
filter	Specify an associated filter type and name.
port	Specify on which port this policy applies to.
state	Enable or disable policy on the port.
evc-encapsulation	Ethernet Virtual Connection encapsulation. Possible values are: push: Add VLAN tag. pop: Remove outer VLAN tag. none: No tags are added or removed from the incoming frames.
evc-ethertype	EtherType to use in the VLAN tag. Applies only if evc-encapsulation is set to push.
evc-vlan-id	VLAN ID in the VLAN tag. Applies only if evc-encapsulation is set to push.
evc-cfi	Direct or default CFI/DEI bit for outgoing traffic. Applies only if evc-encapsulation is set to push.
evc-pcp	Direct or default PCP bits for outgoing traffic. Applies only if evc-encapsulation is set to push.
priority	Policy priority inside the remote device policies list. Use 0 when the priority is not used.
vca	Specify on which VCA this policy applies to.
classification	Specify on which VCA's classification this policy applies to.

policy delete

policy delete - Delete a policy instance

Description:
Delete an existing policy instance.

Syntax:

  policy delete <name>

  <name>        = <string>

Parameters:

Parameter	Description
name	Instance name of policy to be deleted.

policy edit

policy edit - Modify a policy instance on a port or on a VCA classification

Description:
This command defines the traffic filter and the action associated with an access policy.

Syntax:

  policy edit <name> {
        { action [drop | permit]} |
        { filter {l2 | ipv4} <filter-name>} |
        { name <policy-name>} |
        { state [enable | disable]}
        { evc-encapsulation {none | push | pop}}
        { evc-ethertype {c-vlan | s-vlan | t-vlan} |
        { evc-vlan-id <0-4095>} |
        { evc-cfi <0-1>} |
        { evc-pcp <0-7>} |
        { priority <0-255>} |
        { classification <classification-name>}}+

  <name>                = <string>
  <policy-name>         = <string>
  <filter-name>         = <string>
  <classification-name> = <string>

Parameters:

Parameter	Description
action	Drop or not the traffic based on the filter.
filter	Specify an associated filter type and name.
name	Policy name.
state	Enable or disable policy on the port.
evc-encapsulation	Ethernet Virtual Connection encapsulation. Possible values are: push: Add VLAN tag. pop: Remove outer VLAN tag. none: No tags are added or removed from the incoming frames.
evc-ethertype	EtherType to use in the VLAN tag. Applies only if evc-encapsulation is set to push.
evc-vlan-id	VLAN ID in the VLAN tag. Applies only if evc-encapsulation is set to push.
evc-cfi	Direct or default CFI/DEI bit for outgoing traffic. Applies only if evc-encapsulation is set to push.
evc-pcp	Direct or default PCP bits for outgoing traffic. Applies only if evc-encapsulation is set to push.
priority	Policy priority inside the remote device policies list. Use 0 when the priority is not used.
classification	Specify on which VCA's classification this policy applies to.

policy show action

policy show action - Show policies evc actions and mappings

Description:
Display policies evc actions and mappings.

Syntax:

policy show action

policy show configuration

policy show configuration - Show policy configuration

Description:
Display policy configuration. If a policy-id is specified, detailed policy configuration is displayed, otherwise a configuration summary is displayed in a table format.

Syntax:

  policy show configuration [<name>]

  <name> - <string>

Parameters:

Parameter	Description
name	Policy name.

Output:

policy show configuration
Policies configuration
Policy Name                     State    Action  VCA Filter name                     Type  Port Name                       Priority
------------------------------- -------- ------- --- ------------------------------- ----- ------------------------------- --------
vca_based                    Enabled  Permit  Yes   catchAll                         L2    C403-9811-UNI 
legacy                           Enabled  Permit  No    *default                         L2    C403-9811-NNI    

policy show configuration new
Policy new on P100-0467-UNI
State : Enabled
Action : Permit
Filter type : ---
Filter name : ---
VCA : VCA-New
Classification : new
EVC mapping :
Encapsulation : ---
Ethertype : ---
VLAN ID : ---
CFI : ---
PCP : ---
Priority : ---

© 2025 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and trademarks