Below is a list of available CLI commands, grouped according to their primary function.
Ethernet Port Commands
| Command Name |
Description |
| fault-propagation |
Manage the link fault propagation between ports. |
| port |
Manage the link and physical level port settings. |
| sfp |
Display the SFP information, including digital diagnostics. |
User Traffic/Flow Through Commands
| Command Name |
Description |
| cos-profile |
Manage the mapping configuration. |
| filter |
Manage the filter database. |
| flowbroker |
Manage the FlowBroker configuration. |
| flowmeter |
Manage the FlowMETER rule configuration. |
| flowmeter-reporting |
Manage the FlowMETER reporting configuration. |
| fm |
Manage the FlowMETER rule configuration. |
| policy |
Manage policy entries applied on ports. |
System Management Commands
| Command Name |
Description |
| acl |
Manage Access Control Lists. |
| clock |
Manage Clock settings. |
| date |
Print or set the system date and time. |
| discovery |
Manage the discovery of remote devices. |
| dns |
Manage the DNS settings. |
| fips |
Manage the FIPS mode. |
| history |
Manage the history buckets statistics. |
| interface |
Manage the interfaces used to access the management plane. |
| inventory |
Manage the inventory of remote devices. |
| license |
Manage system licenses. |
| mode |
Define general system settings. |
| motd |
Manage the unit’s Message of the Day (MOTD). |
| ntp |
Manage the network time client function. |
| arts |
Manage the Accedian Remote Time Synchronization protocol for remote device synchronization. |
| pca-aaa-client |
Manage the PCA AAA client settings. |
| permission-group |
Manage the user privilege profiles. |
| ptp |
Manage the precision time protocol. |
| radius |
Manage the RADIUS authentication. |
| remote-devices |
Manage the Remote Devices configuration. |
| route |
Manage the IP routes and gateways. |
| security-key |
Manage the security keys for remote devices. |
| session |
Manage the session settings or active sessions. |
| snmp |
Manage the SNMP agent settings. |
| snmp-trap |
Manage the SNMP trap handler configuration. |
| syslog |
Manage the remote syslog settings. |
| syslog-ng |
Manage the remote syslog-ng settings. |
| tacacs-plus |
Manage the TACACS+ authentication. |
| user |
Manage user account settings. |
OAM Commands
| Command Name |
Description |
| alarm |
Manage the alarm settings. |
| cfm |
Manage the SOAM CFM feature. |
| loopback |
Manage loopback settings. |
| twamp |
Manage Two-Way Active Measurement Protocol (TWAMP) instances. |
| twamp-ref |
The replacement of TWAMP instances. |
VNID Commands
| Command Name |
Description |
| unitid |
Manage Hardware information for Manager. |
| nodeid |
Manage NodeID information for Manager. |
| disk-usage |
Manage disk usage. |
| reflector |
Manage software reflector. |
| stream pool |
Manage number of used sessions. |
| stream statistics |
Manage session statistics. |
| stream ports |
Manage IP port used for active sessions. |
| stream table |
Manage running sessions. |
| stream config |
Manage detailed information for active sessions. |
| stream reflector |
Manage active reflector. |
| agent-server |
Manage VNID agent. |
| sync-group |
Manage sync groups. |
| sync-session |
Manage Synchronized Session Result. |
| synce |
Manage Synchronous Ethernet. |
Utilities
| Command Name |
Description |
| app |
Application container for apps like iperf |
| application |
Manage SSL certificates for specific applications |
| certificate |
Manage SSL certificates |
| configuration |
Export, import or factory reset the device configuration |
| feature-suites |
View or manage the features suites |
| firmware |
Install a new firmware or display the current firmware version |
| keepalive |
Keep the CLI session active |
| lldp |
Manage LLDP settings. |
| ping |
Send pings to a specified host over IPv4 |
| ping6 |
Send pings to a specified host over IPv6 |
| pmcollect |
Manage pmcollect settings. |
| rate |
Manage how RFC-2544 rates are calculated |
| reboot |
Restart the device, equivalent to a power up boot |
| rfc2544 |
Run out-of-service packet generator and RFC 2544 tests |
| sat-reporting |
Configure Service Activation Testing reporting |
| statistics |
Clear all statistics |
| storage |
Manage system storage |
| tcp-connect |
Test that verifies if a TCP service is responding |
| tcpdump |
Capture and analyze traffic sent or received on a network interface. |
| tcp-ping |
Verify the reachability of a TCP service by attempting to connect to a specific port |
| traceroute |
Display the hops (route) packets take to reach a given host over IPv4 |
| traceroute6 |
Display the hops (route) packets take to reach a given host over IPv6 |
| trs-bundle |
Manage Cisco TRS bundle. |
| util-tool |
Run system tests and tools |
| nfv-tunnel |
Display NFV tunnel status and quality. |
| tech-support |
Manage system health reports |
| virtual-connection |
Manage virtual-connection settings. |
| y1564 |
Run Y.1564 Service Activation Methodology tests |
Miscellaneous Commands
| Command Name |
Description |
| board |
Manage assembly and environmental information |
| clilog |
Manage log cli. |
| clitest |
Manage clitest settings. |
| exit |
Terminate the current CLI session |
| help <command-name> |
Display this help or for a specific given command |
| noquote |
Disable the quoting of instance names |
| quit |
Terminate the current CLI session |
| quote |
Enable the quoting of instance names |
| system-info |
Display the system information. |
| syntax |
Display the general command syntax |
| system |
Display the system status |
| version |
Display CLI version |