snmp-trap edit auto
snmp-trap edit auto - Edit automatic SNMP trap handler configuration
Description:
This command allows you to change the automatic SNMP trap handler configuration.
Syntax:
snmp-trap edit auto {
{host-state {enable | disable}} |
{host-community <string>} |
{host-port <1-65535>}
{trap-version {v1 | v2c}}
{host-name-refresh}
}+
Parameters:
| Parameter | Description |
|---|---|
| host-state | Enable/Disable the sending of SNMP traps to the configured host. |
| host-community | Community string used to send SNMP traps to the configured host. |
| host-port | This command defines the UDP port to use when sending SNMP traps (the well-known SNMP trap port 162 is used by default). |
| trap-version | Set the version (v1 or v2c) of the configured host SNMP traps. |
| host-name-refresh | Refresh of the configured host name for SNMP traps. |
snmp-trap edit v1
snmp-trap edit v1 - Edit SNMP v1 trap handler configuration
Description:
This command allows you to change the SNMP v1 trap handler configuration.
Syntax:
snmp-trap edit v1 <host-id> {
{host-state {enable | disable}} |
{host-community <string>} |
{host-name <string>} |
{host-port <1-65535>}}+
Parameters:
| Parameter | Description |
|---|---|
| host-state | Enable/Disable the sending of traps to the configured host. |
| host-community | Community string used to send SNMP traps to the configured host. |
| host-name | This command defines the host name or IP address of the server to which the traps (and/or inform notifications) are sent. The unit sends a Cold Start trap when it starts and upon authentication failure. |
| host-port | This command defines the UDP port to use when sending traps (the well-known SNMP trap port 162 is used by default). |
snmp-trap edit v2c
snmp-trap edit v2c - Edit SNMP v2c trap handler configuration
Description:
This command allows you to change the SNMP v2c trap handler configuration.
Syntax:
snmp-trap edit v2c <host-id> {
{host-state {enable | disable}} |
{host-community <string>} |
{host-name <string>} |
{host-port <1-65535>}}+
Parameters:
| Parameter | Description |
|---|---|
| host-state | Enable/Disable the sending of traps to the configured host. |
| host-community | Community string used to send SNMP traps to the configured host. |
| host-name | This command defines the host name or IP address of the server to which the traps (and/or inform notifications) are sent. The unit sends a Cold Start trap when it starts and upon authentication failure. |
| host-port | This command defines the UDP port to use when sending traps (the well-known SNMP trap port 162 is used by default). |
snmp-trap show
snmp-trap show - Show SNMP trap handler configuration
Description:
snmp-trap show displays the SNMP trap handler configuration.
Syntax:
snmp-trap show
© 2025 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks