policy

New
  • Published on Sep 4, 2025
  • 4 minute(s) read
  • AC
 Prev Next

policy clear statistics

policy clear statistics - Clear policy statistics

Description:

Clear policy statistics. If <traffic-name> and <policy-id> are not specified, all policies statistics for all traffic-names will be cleared. If, <traffic-name> is specified, the policies statistics for this <traffic-name> will be cleared.

Syntax:

policy clear statistics [<Traffic-name>] [<policy_id>]

Parameters:

Parameter Description
<Traffic-name> <string>
<policy-id> <decimal>

policy edit

policy edit - Edit an existing policy

Description:

This command defines the traffic filter and the action associated with an access policy.

Syntax:

policy edit { Traffic-1 | Traffic-2 | Traffic-3 | Traffic-4} <policy-id> {
          { state {enable | disable}} |
          { out-port <port-name>} |
          { queuing-profile <queuing-profile-name>} |
          { filter {l2 | ipv4 | ipv6 | vlan} <filter-name>} |
          { action {permit | drop | MGMT-OAM | MGMT-OAM-drop |
                    MGMT-OAM-fwd | none}} |
          { monitor {enable <monitor-name> | disable}} |
          { evc-encapsulation {none | push | pop | replace | pop-replace |
                             push-preserve | preserve-vlan-new-cfi-pcp |
                             push-push | pop-pop | push-replace}} |
          { evc-ethertype {c-vlan | s-vlan | t-vlan} |
          { evc-ethertype2 {c-vlan | s-vlan | t-vlan} |
          { evc-vlan-id <0-4095>} |
          { evc-vlan-id2 <0-4095>} |
          { cos-mapping {preserve | direct | map}} |
          { map1-state {enable | disable}} |
          { map1-type {pcp-vlan | pcp-vlaninvlan | precedence | dscp}} |
          { map1-cos-profile <cos-profile-name>} |
          { map1-regulator-set {enable <regulator-set-name> | disable}} |
          { map2-state {enable | disable}} |
          { map2-type {pcp-vlan | pcp-vlaninvlan | precedence | dscp}} |
          { map2-cos-profile <cos-profile-name>} |
          { map2-regulator-set {enable <regulator-set-name> | disable}} |
          { green-cfi <0-1>} |
          { yellow-cfi <0-1>} |
          { green-pcp <0-7>} |
          { yellow-pcp <0-7>} |
          { pre-marking {green | yellow | red} |
          { regulator {enable <regulator-name> | disable}}
            }+

Parameters:

Parameter Description
<policy-id> <decimal>
<filter-name> <string>
<regulator-name> <string>
state Enable or disable the policy.
out-port Outgoing port for this policy.
queuing-profile The queuing profile associated with this outgoing port.
filter Specify an associated filter type and name.
action Drop or Permit the traffic matching the filter.
Note: None, MGMT-OAM, MGMT-OAM & Drop, and MGMT-OAM & Forward actions are not supported when the filter type is VID set.
monitor Allow monitoring the traffic on a monitor.
evc-encapsulation Ethernet Virtual Connection encapsulation. Possible values are:
  • push: Add VLAN tag.
  • pop: Remove outer VLAN tag.
  • replace: Replace outer VLAN tag.
  • pop-replace: Pop outer VLAN tag and replace inner VLAN tag.
  • push-preserve: Add VLAN tag using the VLAN ID of the inner VLAN (if any).
  • preserve-vlan-new-cfi-pcp: Preserve the VLAN ID and remark the CFI and PCP values.
  • push-push: Add inner and outer VLAN tags.
  • pop-pop: Pop inner and outer VLAN tags.
  • push-replace: Add an outer VLAN and replace the inner VLAN tag.
  • none: No tags are added to the incoming frames.
evc-ethertype Ethertype to use in the VLAN tag. Applies only if evc-encapsulation is set to push, push-preserve, replace, push-push, pop-pop, push-replace or pop-replace.
evc-vlan-id VLAN ID in the VLAN tag. Applies only if evc-encapsulation is set to push, push-preserve, replace, push-push, pop-pop, push-replace or pop-replace.
evc-ethertype2 Ethertype to use in the second VLAN tag. Applies only if evc-encapsulation is set to push-push or push-replace.
evc-vlan-id2 VLAN ID in the second VLAN tag. Applies only if evc-encapsulation is set to push-push or push-replace.
cos-mapping CoS mapping action. The action can be preserve, direct, or map.
map1-state First choice mapping state.
map1-type First choice mapping type. Specifies which incoming traffic attribute to use for traffic mapping.
map1-cos-profile First choice mapping CoS profile. Use this profile to map the incoming traffic based on the traffic attribute selected in map1-type.
map1-regulator-set First choice mapping regulator set. Regulator set to use for traffic regulation based on the traffic attribute selected in map1-type.
map2-* Second choice mapping. Applies only if CoS mapping action is set to map.
green-cfi Direct or default CFI/DEI bit for outgoing green traffic. The default behavior is active when the cos-mapping is set to preserve or map and the incoming traffic is neither handled by the first nor the second mapping choices.
green-pcp Direct or default PCP bits for outgoing green traffic.
yellow-cfi Direct or default CFI/DEI bit for outgoing yellow traffic.
yellow-pcp Direct or default PCP bits for outgoing yellow traffic.
pre-marking Direct or default pre-marking color.
regulator Direct or default traffic regulator.

policy show configuration

policy show configuration - Show policy configuration

Description:

Display policy configuration. If a policy-id is specified, detailed policy configuration is displayed, otherwise a configuration summary is displayed in a table format.

Syntax:

policy show configuration { Traffic-1 | Traffic-2 | Traffic-3 | Traffic-4}
                           [<policy-id>]

Parameters:

Parameter Description
<policy-id> <decimal>

policy show statistics

policy show statistics - Show policy statistics

Description:

Display policy packet and byte counters.

Syntax:

policy show statistics { Traffic-1 | Traffic-2 | Traffic-3 | Traffic-4}
                         <policy-id> {
                         { type {clearable | persistent | historic} } | 
                         { buckets <0-16>} | 
                         { period <period-id>}
                         }+

Parameters:

Parameter Description
<policy-id> <decimal>
<period-id> <decimal>
type Type of statistics to display:
  • clearable: Current statistics since the last clear command.
  • persistent: Current statistics since system start.
  • historic: History buckets statistics. If the number of buckets is not specified, the last 4 buckets will be displayed, starting from the specified period. If no period is specified, the last 4 buckets will be displayed.
  • buckets: Number of policy buckets to display.
  • period: Reference period for the policy history buckets. Zero for the most recent period available.

© 2025 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks