dry-contact-input edit
dry-contact-input edit - Change dry-contact configuration
Description:
With dry-contact-input edit, you can change the parameters of one of the available dry-contact input.
Syntax:
dry-contact-input edit <id> {
{state {enable|disable}} |
{normal-state {close|open}} |
{name <dry-contact-input-name>} |
{sampling-period <100-1000>} }+
Parameters:
| Parameter | Description |
|---|---|
| <id> | <decimal> |
| state | Enable/disable the use of the dry-contact input. When enabled, the alarm point for this input is created and the input is monitored according to the following monitoring configurations. |
| normal-state | Selects the normal state of the input. An alarm is raised when the input state is different from the normal state for more than 3 consecutive samples. The input sampling rate is determined by the value of the input sampling period. |
| name | Specifies the name of the dry-contact used in alarms. |
| sampling-period | Determines the time, in milliseconds, between two consecutive readings of the input state. The values must be specified within the range of 100 and 1000 milliseconds in steps of 100 milliseconds. |
dry-contact-input show configuration
dry-contact-input show configuration - Show dry-contact configuration
Description:
Display all configuration parameters of the available dry-contact input.
Syntax:
dry-contact-input show configuration
dry-contact-input show status
dry-contact-input show status - Show dry-contact status
Description:
Display status of the available dry-contact input.
Syntax:
dry-contact-input show status
© 2025 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks