Below is a list of available CLI commands, grouped according to their primary function.
Ethernet Port Commands
| Command Name |
Description |
| cable-test |
Perform time domain reflectometry diagnostics. |
| erp |
Ethernet Ring Protection configuration. |
| fault-propagation |
Manage the link fault propagation between ports. |
| port |
Manage the link and physical level port settings. |
| sfp |
Display the SFP information, including digital diagnostics. |
User Traffic/Flow Through Commands
| Command Name |
Description |
| bandwidth-regulator |
Manage bandwidth regulator database. |
| cos-pcp-map |
Manage port CoS mappings. |
| cos-profile |
Manage service mapping CoS profiles. |
| filter |
Manage the filter database. |
| l2pt |
Manage L2 protocol tunneling rules. |
| monitor |
Manage traffic monitors. |
| policy |
Manage policy entries applied on ports. |
| regulator-set |
Manage service mapping regulator sets. |
| shaping |
Manage the traffic shapers database. |
| traffic |
Policy list VLAN mode configuration. |
| vid-set |
Manage VID sets. |
System Management Commands
| Command Name |
Description |
| acl |
Manage Access Control Lists. |
| beacon |
Manage Plug & Go beacon instances. |
| bridge |
Manage the bridge created with the interface module. |
| console |
Manage the serial (RS-232) console port. |
| cpu |
Manage CPU OAM options. |
| date |
Print or set the system date and time. |
| dhcp-relay |
Manage DHCP relay servers. |
| dns |
Manage the DNS settings. |
| fips |
Manage the FIPS mode. |
| history |
Manage the history buckets statistics. |
| interface |
Manage the interfaces used to access the management plane. |
| inventory |
Manage the inventory when using auto configuration with beacons. |
| ipv4 |
Manage IPv4 settings. |
| lldp |
Manage LLDP configuration and display neighbors. |
| mode |
Define general system settings. |
| motd |
Manage the Message of the Day (MOTD) of the unit. |
| mtr |
Manage management traffic regulation settings. |
| ntp |
Manage the network time client function. |
| pca-aaa-client |
Manage the PCA AAA client settings. |
| permission-group |
Manage the user privilege profiles. |
| ptp |
Manage the network time client function. |
| radius |
Manage the RADIUS authentication. |
| route |
Manage the IP routes and gateways. |
| session |
Manage the session settings or active sessions. |
| snmp |
Manage the SNMP agent settings. |
| snmp-trap |
Manage the SNMP trap handler configuration. |
| syslog |
Manage the remote syslog settings. |
| syslog-ng |
Manage the remote syslog-ng settings. |
| tacacs-plus |
Manage the TACACS+ authentication. |
| user |
Manage user account settings and privilege profiles. |
| vcagent |
Manage the Vision Collect bucket statistics. |
OAM Commands
| Command Name |
Description |
| alarm |
Manage the alarm settings. |
| cfm |
Manage the SOAM CFM feature. |
| loopback |
Manage the loopback settings associated with an OAM instance. |
| oam |
Manage the OAM instances (802.3ah). |
| paa |
Manage the Performance Assurance Agent instances. |
| sa |
Manage the Service Availability instances. |
| twamp |
Manage Two-Way Active Measurement Protocol (TWAMP) instances. |
| twamp-gen |
Manage TWAMP generator sessions. |
Utilities
| Command Name |
Description |
| application |
Manage SSL certificates for specific applications. |
| certificate |
Manage SSL certificates. |
| configuration |
Export, import or factory reset the device configuration. |
| firmware |
Install a new firmware or display current firmware version. |
| ping |
Send pings to a specified host over IPv4. |
| ping6 |
Send pings to a specified host over IPv6. |
| reboot |
Restart the device, equivalent to a power up boot. |
| rfc2544 |
Run in-service and out-of-service RFC-2544 tests. |
| sat-protocol |
Configure Service Activation Testing protocol. |
| sat-reporting |
Configure Service Activation Testing reporting. |
| statistics |
Clear all statistics (port, policies, regulators, OAM). |
| tcp-connect |
Test that a TCP service is responding. |
| tcpdump |
(Assurance Sensor GT/GT-S only) Capture and analyze traffic sent or received on a network interface. |
| traceroute |
Display the route packets take to reach a given host over IPv4. |
| traceroute6 |
Display the route packets take to reach a given host over IPv6. |
| trs-bundle |
Manage Cisco TRS bundle. |
| y1564 |
Run Y.1564 Service Activation Methodology tests. |
Miscellaneous Commands
| Command Name |
Description |
| board |
Manage assembly and environmental information. |
| exit |
Terminate the current CLI session. |
| help <command-name> |
Display this help or for a specific given command. |
| quit |
Terminate the current CLI session. |
| system-info |
Display the system information. |
| syntax |
Display the general command syntax. |
| version |
Display the CLI version. |